|
|
 |
Multiplexor - SM1-16 (Communication
Multiplexor and Telephone Line Switch) |
| |
 |
The
Substation multiplexor provides a low-cost,
dependable way to switch 16 or more serial
devices in a substation to a single telephone
line or to an Ethernet LAN connection. Using
this device, you will be able to access any
meter, relay or other IED in your station
from a remote location. The unit provides
either an Ethernet (10 Base T RJ45) or Modem
connection to the substation devices with
a switch command to choose the specific device
at the desired port. Using the SM1-16, you
can collect your data, quickly, easily and
reliably. |
|
Multiplexor - SM1-16
Substation
Multiplexor Brochure
Substation
Multiplexor Instruction Manual
Substation
Multiplexor Ethernet Instruction Manual
|
 |
|
Features
- 19''
Rack Mount
- Optically
Isolated
- 16
Ports —(2) RS485 & (14) RS232
Ports
- Built-In
Isolated 33k or 56k Modem
- 10
Base-T Ethernet Connectivity NEW!
- Multi-level
Password Protection NEW!
- Universal
Design for Any Serial IED
- Incorporates
Modem Manager® Technology
- High
Speed Communication Lowers Telephone Bill
- Designed
for Harsh Substation Environments
- Low
Cost
- Improves
Telephone Line Communications
|
|
|
|
|
Wireless
Modem Kit |
| |
Easy
Install Wireless Cell Phone Modem Kit
|
Downloads |
| Communicate
Wirelessly with Any RS-485 Device or Network |
|
|
|
| Features |
- Provides
Reliable Cell Phone Serial Communication
-
Signal Buffering Reduces Cell Problems
-
Mounted in an Outdoor Rated NEMA4 Enclosure
-
Power Supply Included
-
Simple to Use and Set Up
-
Options for Either CDMA or GSM Networks
-
Verizon Wireless Provisioning by Electro
Industries
|
|
|
| Description |
In
response to industry request to
provide reliable wireless based
communication to remote meters,
EIG has designed this wireless modem
kit to improve and simplify communication
with remote meters or IEDs using
CDMA or GSM wireless cell phone
communication. The kit also includes
the line-saving, intelligent buffering
capabilities of the Modem Manager
RS-485 to RS-232 Converter.
NOTE: Your area must support Digital
Circuit Switched Data Technology.
|
|
|
|
|
Unicom
2500 (The Universal Communication Converter) |
| |
This rugged device reliably
solves a host of communication problems. It
converts two- or four-wire RS485 to RS232
(and back again), and an optional module converts
either of these formats into fiber optic,
Bidirectionally. The Unicom 2500 communicates
at a rate of up to 115 kilo baud, and it even
increases the throughput of two-wire RS485
mode. Its opto-isolation protects your valuable
equipment and buses from destructive spikes
and surges of up to 2500 volts. The Unicom
also has a DTE/DCE switch that eliminates
the need for a null—modem. A nifty little
feature that can’t be fully appreciated
until it’s needed. |
|
Unicom
2500
Unicom
2500 Brochure
Unicom
2500 Instruction Manual
|
| Features
- Protects
Against Spikes and Surges to 2500 Volts
- Rugged
Design
- Withstands
Harsh Environments
- Supports
2- and 4-Wire RS485
- Up
to 115 Kilo Baud
- Switch-Selectable
Settings
- Faster
Two-Wire RS485 Communication
|
|
|
|
|
|
|
Modem
Manager |
| |
This
intelligent modem buffer is the ultimate,
affordable way to communicate with remote
devices. It has all the capabilities of our
Unicom 2500 (without the fiber-optic option),
and then some. With Modem Manager 1, you’ll
never again program a modem or worry about
poor phone lines. Its buffer is 32 times the
size of the most advanced single-line modems.
It handles bidirectional RS485-to-RS232 conversion
and it can even be reprogrammed in person
or over the phone. Modem Manager 1 is simply
the most useful communication accessory ever.
|
|
Modem
Manager
Modem
Manager 1 Brochure
Modem
Manager 1 Instruction Manual
|
|
Features
- The
Ultimate Modem Buffer
- Solves
all Modem Communication Problems
- Eliminates
Modem Programming
- Converts
RS485 to RS232 and Back
- Protects
Against Spikes and Surges to 2500 Volts
- Works
Perfectly with All Remote Communicating
Devices
- Optimizes
the Speed of Communications
|
|
|
|
| |
|
|
A7Z/A9U
- Zero Power ANSI Optical Probe |
| |
The
A7Z/A9U is a new ANSI type 2, zero power,
optical communication probe. The A7Z is
a bidirectional interface that utilizes
infrared light. This new optical communication
probe provides an ANSI rated optical communication
interface for programming and reading electric
utility meters using a serial RS232 port.
Connecting to a serial port, the A7Z permits
isolated communication with meters.
The A7Z is designed for
serial communication.
The A9U has a direct USB
interface.
Features
- Requires
No Power Supply
-
High Speed – Up to 57,600 baud
-
ANSI Type 2 Compatible
-
Works Great with Nexus Series Socket Revenue
Meters
- Extra-flexible,
2 meter cable
-
Bidirectional Interface
-
Magnetic Adhesion
-
DTR Switch
|
|
A7Z-
Zero Power ANSI Optical Probe
(Serial RS232 Port)
A9U-
Zero Power ANSI Optical Probe
(USB 1.1 or 2.0 Port)
A7Z/A9U
Brochure
|
| |
|
|
|
| |
|
|
|
|
