DMMS
350 (Advanced Multi-Function Meter with Ethernet TCP/IP)
Features
True
RMS Voltage, Current & Power Measurement
Bidirectional
Energy & Min/Max on all Electrical Parameters
On-Board
Ethernet Protocol with Standard Modbus TCP
- 10 Base T RJ45 Connection
Harmonics
(%THD & K-Factor) to the 31st order
Bright
LED Display
Standard
ANSI Size for Easy Installation to New or
Retrofit Panels
Advanced
Control Features
KYZ
Pulse for Energy
Ideal
Circuit Monitoring for Main Feeds,
Branch Circuits, Gensets & Equipment
The DMMS
350 Multifunction Power Meter provides
complete access to all voltage, current, and
power values through an easy to use display
and through your TCP/IP Ethernet LAN.
This
meter is ideal for applications requiring real
time metering data streaming to data collection
systems through a facility LAN or through the
ethernet. This meter provides on-line connectivity
easily, quickly and economically.
Low
Cost Multifunction Meter
with Built-in Ethernet
The DMMS
300+ advanced multifunction monitoring system
replaces all individual single-function meters and
transducers. This monitor measures volts, amps, frequency
and all power functions, including watts, vars, frequency,
power, watt-hours, var/hours, demand, harmonics and
more. It offers 283 readings in a standard switchboard-size
footprint.
The
DMMS also displays %THD, K factor and harmonic
waveforms. The monitor conducts a comprehensive
power-quality analysis measuring harmonics to
the 31st order for both voltage and current.
This
unit offers the greatest range of communication
options available in the industry.
DMMS
425
(Economically Priced Switchboard Meter)
Features
Economical
Design
Reliable
Proven Design
Bright
LED Display
Measures
Over 80 Electrical Parameters
Modbus,
Modbus Plus or DNP 3.0
KYZ-Pulse
Outputs
Revenue
Accurate for Utility Submetering
Standard
ANSI Cutout
Small
Footprint
AC/DC
Power Supply
The
DMMS 425 measures more than 80 electrical
power parameters. It's a low-cost, multifunction
solution for utility, industrial and power generation
applications. The DMMS 425 is great for utility
submetering, tenant metering, substation automation,
generator monitoring and more.
Advanced Communications Capability:
Modbus
Plus—New!
Modbus
RTU/ASCII
DNP
3.0
This unit offers the greatest range of communication
options available in the industry. Nothing else
compares!
The 3DAA5 simultaneously
displays phases A, B and C. With the press of
a button, it will toggle the neutral. It replaces
traditional utility three-phase amp-demand meters.
The unit monitors maximum and minimum thermal
demand for all phases of current, including the
neutral.
Features
Harmonic
Measurements to the 31st Order (Including
a Captured Waveform)
Set
Points and Form C Dry-Contact Relays for
Over and Under Current, and over %THD K Factor
RS232
or RS485 Digital Communication
Displays
%THD and K Factor for Each Current Reading
Great
for Motor Control Centers or Utility Distribution
Feeders
The 3DVA120 simultaneously
displays all phase-to-neutral or phase-to-phase
voltages. It provides maximum and minimum readings
based on a user-selectable sliding-window averaging
period.
Features
RS232
or RS485 Digital Communication
Harmonic
Measurements to the 31st Order (Including
a Captured Waveform)
Displays
%THD and K Factor for Each Voltage Reading
This
unit simultaneously displays watts, var, KVA
and power factor. The 3DWA is available in 3-,
2.5- and 2-element connections. It is a full
four-quadrant meter with polarity indicators.
Features
Simultaneously Displays Watts,
Vars, KVA and Power Factor
This
unit is commonly used in generator output applications
and utility substations. Technicians especially
like its simplicity. It is also the only WATT/VAR
meter that also displays KVA and power factor.
DWVA
300 (Distribution-Load
Feeder Monitor - Displays Watts, VARs and Amps)
The
DWVA 300 eliminates single-function meters and
switches to maximize panel space. It offers highly
accurate, true RMS readings. This unit is very
popular for load feeders. It simultaneously displays
watts, VARs and amps. It’s easy to read,
rugged and reliable.
Features
Simultaneously Displays Watts,
Vars, KVA and Power Factor
The
monitor has a harmonic measurement option capability
to the 31st order. The DWVA 300 also offers
maximum/minimum demand values for all measurements.
The monitor also provides DNP 3.0, Modbus RTU/ASCII
and analog-transducer outputs.
DWVV
300 (Distribution
Main Monitor - Displays
Watts, VARs and Volts)
Displaying
precise values for watts, VARs and volts simultaneously,
the DWVV300 power meter, the perfect solution
for monitoring distribution feeder loads.
Features
Displays
Voltage, Watts and VAR
Supports
Modbus (RTU & ASCII)
and DNP 3.0 Protocol
With
its rugged construction,
easy-to-read display and
standard ANSI footprint,
the DWVV300 is an ideal
retrofit for replacing
traditional utility distribution-feeder
meters.
